تاجا هارمونى مكبرات صوت ارضية TAV-607F

تصميم الوقوف على الأرض ، 3 اتجاهات ، 4 برامج تشغيل
TLIE-I ،
نقاط التقاطع: 550 هرتز ، 3 كيلو هرتز
 الطاقة 20-120 واط (قوة مكبر الصوت الموصى بها)
90 واط RMS
استجابة التردد 40 هرتز - 25 كيلو هرتز
باسريفلكس واحد أمامي
مقاومة 6 أوم
 عالي التردد 25 مم (1 بوصة) ، TWG-I
 متوسط المدى 165 مم (6.5 بوصات)
الميزات / الملحقات قدم
المسامير الألومنيوم
الأبعاد (الطول × العرض × العمق) 98 × 21 × 29 سم (باستثناء القدمين / المسامير)
102.5 سم (الارتفاع شاملاً القدمين / المسامير)
وزن 14 كجم / قطعة. (باستثناء القدمين)

للمزيد من المعلومات اضغط هنا

اتصل بنا
الحالة: متوفر
SKU
TAV-607F

Taga Harmony TAV-607F Floor Standing Speakers

Taga Harmony TAV-607F Floor Standing Speakers

CABINET
TLIE-I – The 2nd generation of Taga Low Interference Enclosures is made of high-quality, high-density MDF boards (21 mm for the front baffle and 12 mm for other walls) with inside braces to increase stiffness and limit any unwanted resonances. 
The shapes are perfectly crafted not only to look wonderful and modern but mainly to lower any unwanted vibrations, diffractions or turbulences, which can affect the sound performance.

The steep enclosure top is leaned at around 4 degrees from the front to the rear to further limit unwanted resonances and turbulences.

High-end enclosure damping material is used to better break up the standing waves, lower resonances and limit distortions what improves the smoothness and characteristics of sound in all ranges.

Nylon feet and aluminum spikes. 
The feet are exceptionally rigid and thick to provide almost perfect isolation of speakers from the floor and  increasing the transparency of sound and to produce better definition and control for the bass. 
Carefully selected high quality vinyl finishes are very durable, elegant, imitate natural wood texture and are very pleasant in touch. The vinyl finishes are neatly applied to cabinets using precise machinery to provide the best looks.

. T-YOKE / Pole piece
. Oversized ferrite magnet    
. Top plate 
. Sound-absorbing cotton
. Copper voice coil                         
. Black silk dome
. TWG-I Front faceplate (2 pieces)
Upgraded 1” (25 mm) silk dome high-frequency driver with oversized Φ70 magnet, ferrofluid cooling and heavy duty copper voice coil can handle high power and its performance is very accurate, clear, smooth, detailed and airy sound.

2nd generation TWG-I tweeter faceplate  (Taga WaveGuide) - specialized horn-like design of the tweeter's faceplate utilizing concave diffusers assists with equal and flat dispersion of sound in and off the axis of the driver.
In the newest edition the shape and depth have been redesigned to allow better flow of sound stream and even wider dispersion which helps to build a more three-dimensional and natural soundstage. Minimizing the number of components means better structural rigidity, lower distortions and resonances.

T-YOKE / Pole piece
2. Oversized ferrite magnet            
3. Top plate
4. Terminal
5. Ferrum injection-molded chassis with anti-oxidation surface process
6. Spider
7. Copper voice coil
8. Polypropylene cone and rubber surround
9. Polypropylene flat dust cap

Ultra-light polypropylene cone with elastic rubber suspension, oversized magnet structure (Φ80 for midrange ; Φ90 magnet for bass) , heavy duty voice coil and coil former copped with more rigid driver chassis are built to withstand higher power handling and longer operation time without increasing driver temperature and in result to generate smooth, rich and very natural midrange frequency response and deep, musical and precise bass. 
The flat dust cap supports air flow and smoothens the frequency response.

BOM Bassreflex Omnidirectional Module - low-turbulence and high-velocity ports utilizing concave diffusers for increased dispersion of low frequencies.

CROSSOVER
High quality, close-tolerance and precisely selected crossover components and internal wires for absolute sound neutrality, high long-term power and reliability.

INTERNAL WIRING
TAGA Harmony utilizes high quality internal wiring connecting crossovers with drivers assuring that incoming audio signals from receiver or amplifier will not lose any important details on the paths to drivers.

BINDING POSTS
High quality, gold-platted banana binding posts accepting raw speaker cables up to 10AWG and most popular types of connectors. 

المزيد من المعلومات
SKUTAV-607F
الموديلTaga Harmony TAV-607F Floor Standing Speakers