تاجا هارمونى مكبرات الصوت المنزلية المركزية بلاتين C-100 V.3

الطاقة : 20 - 200W (recommended amplifier power)

150W RMS

التردد : 38Hz - 40kHz
مقاومة : 6ohm

التردد العالى: 25 mm (1”), TPTTD-I, TWG-I  

للمزيد من المعلومات اضغط هنا

اتصل بنا
الحالة: متوفر
SKU
C-100 V.3

TAG Harmony Platinum C-100 V.3 Centers standings

TAG Harmony Platinum C-100 V.3 Centers standings

PLATINUM v.3 series

CABINETS

TLIE-I – The 2nd generation of Taga Low Interference Enclosures is made of high-quality, high-density 15mm thick MDF boards with inside braces (floorstanding models) to increase stiffness and limit any unwanted resonances. The thicker internal bracing and additional transverse strengthening bars (2 in Platinum F-120 v.3, 1 in Platinum F-100 v.3) help to further reduce vibrations.

The shapes are perfectly crafted not only to look wonderful and modern but mainly to lower any unwanted vibrations, diffractions or turbulences, which can affect the sound performance.

New high-end enclosure damping material is used to better break up the standing waves, lower resonances and limit distortions what improves the smoothness and characteristics of sound in all ranges.

All models are equipped with magnetically mountable grills to keep more sleek appearance of speakers’ front panel and new drivers as well as to lower distortions when the grill is taken off.

 

All floorstanding models sit on die-cast aluminum feet and spikes. 
The feet are exceptionally rigid and thick to provide almost perfect isolation of speakers from the floor and  increasing the transparency of sound and to produce better definition and control for the bass.

Carefully selected high quality vinyl finishes are very durable, elegant, imitate natural wood texture and are very pleasant in touch. The vinyl finishes are neatly applied to cabinets using precise machinery to provide the best looks.

. T-YOKE / Pole piece
. Copper ring
. Oversized ferrite magnet
 Top plate
 TPTTD-I Taga Pure Titanium Tweeter Dome and CCAW voice coil with silver wiring
 TWG-I faceplate - basis
. Metal grill
. TWG-I faceplate - front panel

TPTTD-I – the 2nd generation Taga Pure Titanium Tweeter Dome utilizes a new differently shaped and lighter titanium dome as well as an addition of a copper ring on the T-yoke to increase and widen SPL and at the same time lower distortions and to provide faster and more accurate movement of the dome reflecting in more detailed and airy sound.

TWG-I - Taga WaveGuide  tweeter faceplateA specialized horn-like design of the tweeter's faceplate utilizing concave diffusers as well as dome metal grill assists with equal and flat dispersion of sound in and off the axis of the driver. In the newest edition the shape and depth have been redesigned to allow better flow of sound stream and even wider dispersion which helps to build a more three-dimensional and natural soundstage. Minimizing the number of components means better structural rigidity, lower distortions and resonances.
 
TTP Taga Top Plate (selected models only) reduces standing waves effect and creates three-dimensional performance.   

. Additional oversized ferrite magnet [only woofers in F-120 v.3 /F-100 v.3]
. T-YOKE / Pole piece
. Oversized ferrite magnet
 Top plate
. Aluminum injection-molded chassis with anti-oxidation surface process
 Spider
. Flat wire copper voice coil
TPACD-I Taga Pure Aluminum Cone and TRCS rubber surround
 Pure aluminum dust cap

TPACD-I – the 2nd generation Taga Pure Aluminum Cone Drivers utilize rigid aluminum chassis and provide ultra-fast movement for smooth, rich and very natural midrange frequency response as well as deep, precise and detailed bass performance.
- Differently shaped and lighter aluminum cones allow faster, more accurate movement of the cone reflecting in more detailed and airy sound.
- New flat pure aluminum dust cap to increase air flow and smoothen the frequency response.
- Heavy duty and powerful motor structure including oversized magnets:  Φ90 in the midrange driver , double Φ110 and  Φ100 in F-120 v.3 /F-100 v.3 woofers,  Φ120 in the B-40 v.3 mid-woofer (the whole structure is the same as in the flagship Diamond B-60), Φ80 in the C-100 v.3 / S-100 v.3  and totally new flat wire copper voice coils offer higher power handling and longer operation time without increased temperature generating better and more dynamic sound performance.

TRCS - Taga Reversed Cone Surround provides more stable, faster and greater range of cone movement reflecting in higher dynamics and more precise and neutral sound.

. Rear cover
. Aluminum injection-molded chassis with anti-oxidation surface process
. 77g steel piece
. Spider
. 23g steel piece
 Pure aluminum cone and TRCS rubber surround
. Pure aluminum dust cap

TPAPR-I- the 2nd generation Taga Pure Aluminum Passive Radiator with pure aluminum cone, dust cap and chassis. The TPAPR-I helps to add extra low bass using internal pressure produced by active bass and bass-midrange drivers.

- New TRCS Taga Reversed Cone Surround which provides more stable, faster and greater range of cone movement reflecting in higher dynamics and more precise and neutral sound.
- Differently shaped and lighter aluminum cone allows faster, more accurate movement of the con reflecting in more detailed and deeper bass.
- New flat pure aluminum dust cap to increase air flow, sound pressure and smoothen the frequency response.

BOM Bassreflex Omnidirectional Module -low-turbulence and high-velocity ports utilizing concave diffusers for increased dispersion of low frequencies.
   
Ogrodnik crossovers [selected models] - Platinum v.3 series’ performance is controlled by Ogrodnik crossover sections. They are specially and personally designed and engineered by well recognized Polish loudspeaker designer and audio press reviewer Mr. Arek Ogrodnik. We use minimal number of high quality and carefully selected components in the high-pass and low-pass crossover sections to ensure the best neutrality, to handle massive amounts of power and to provide the greatest precision.   

المزيد من المعلومات
SKUC-100 V.3
الموديلTAG Harmony Platinum C-100 V.3 Centers standings