Technical Specifications:
| Input voltage | 90V – 240V AC +/-10% @ 50Hz1 | |
| Current consumption (Mains) | 250mA | |
| Battery charger current output | 1.8A @ 27.4V +/-1% | |
| Maximum number of operations per day | 750.2, 5 | |
| Duty cycle – Mains present2, 3 | 45% | |
| Motor voltage | 24V DC | |
| Motor power supply | Battery-driven (Standard Capacity – 2x 7.2Ah)3 | |
| Current consumption (motor at rated load) | 9A | |
| Input / Output sink currents (Max accessory current draw) | ||
| I/O 1-4 | 100mA (12/24V) | |
| I/O 5 and 6 | 3A (12/24V) 10sec Pulse | |
| Motor push force – starting | 52kgf | |
| Motor push force – rated | 39kgf | |
| Gate mass – maximum | 2000kg | |
| Gate length – maximum | 25m | |
| Gate speed (varies with load)2, 5 | Up to 18m/min3 | |
| Manual Override | Lockable lever with key release | |
| Drive Pinion | 13T Module 4 | |
| Operations in standby with 2x 7.2Ah batteries | Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) | |
| Half day2, 3, 4 | 101 | 55 | |
| Full day2, 3, 4 | 80 | 45 | |
| Collision Sensing | Electronic | |
| Operating temperature range | -15°C to +50°C | |
| Onboard receiver type | CENTURION rolling code (Keeloq encryption) multichannel | |
| Receiver code storage capacity | 1500 Remotes6 | |
| Receiver frequency | 433.92MHz | |
| Degree of protection | IP54 | |
| Mass of unit packed (with standard kit, but excl. rack and battery) | 13Kg | |
| Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high
|
1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
Reviews
There are no reviews yet.